# Reaction Mechanisms

Submitted by ChemPRIME Staff on Thu, 12/16/2010 - 15:48

There are two main types of microscopic processes by which chemical reactions can occur.

A unimolecular process involves a single moleculeA set of atoms joined by covalent bonds and having no net charge. as a reactantA substance consumed by a chemical reaction., and its rate lawAn equation which describes the rate of a reaction as a function of the rate constant and the concentrations of reactants (and any other substances that affect the rate, such as products or catalysts); also called rate equation. is first order in that reactant. A bimolecular process involves collision of two molecules. Its rate law is first order in each of the colliding species and therefore second order overall. Based on this we might expect all rate laws to be first order or second order, but this conclusion does not agree with several of the experimental rate laws described earlier. (example 2 on The Rate Equation section had one rate law which was fifth order overall!)

The reason for this discrepancy is that we have not considered the possibility that an overall reaction may be the sum of several unimolecular and/or bimolecular steps. The sequence of steps by which a reaction occurs is called the mechanism of the reaction. Each unimolecular or bimolecular step in that mechanism is called an elementary processIn chemical kinetics, a reaction that takes place when a single molecule breaks apart or when two molecules collide; the rate law for an elementary process can be determined from the coefficients in the chemical equation; reaction mechanisms must consist only of elementary processes. Also called elemenary reaction.. The term elementary is used to indicate that such steps cannot be broken down into yet simpler processes. In most mechanisms some species which are produced in the earlier steps serve as reactants in later elementary processes. Such species are called intermediates.

The mechanism proposed for a given reaction must be able to account for the overall stoichiometric equation, for the rate law, and for any other facts which are known. As an example of how a mechanism can be devised to meet these criteria, consider the reaction

2I + H2O2 + 2H3O+ → I2 + 4H2O      (1)

When the pHA logarithmic measure of the concentration of hydrogen (hydronium) ion; pH = -log10([H+]) or pH = -log10([H3O+]). of the solutionA mixture of one or more substances dissolved in a solvent to give a homogeneous mixture. is between 3 and 5, the rate law is

Rate = k(cI)(cH2O2)

We can immediately eliminate a single-step mechanism, not only because simultaneous collision of 2I, H2O2, and 2H3O+ is highly unlikely, but also because the rate law suggests a bimolecular process involving the collision of I and H2O2. The mechanism proposed for this reaction is

HOOH + I $\xrightarrow{\text{slow}}$ HOI + OH      (1a)

HOI + I $\xrightarrow{\text{fast}}$ I2 + OH        (1b)

2OH + 2H3O+ $\xrightarrow{\text{fast}}$ 4H2O          (1c)

You can verify for yourself that these three steps add up to the overall reaction in Eq. (1).

The proposed mechanism can account for the rate law because the first step [Eq. (1a)] is much slower than the latter two. Once HOI is produced in that first step, it is transformed almost instantaneously into I2 and OH by the second step. Similarly the OH produced by the first and second steps reacts immediately with H3O+ to form H2O. Therefore the rate of the overall reaction is limited by the rate of the first step, and the rate law must be second order since that first step is bimolecular.

What we have just said applies to any reaction mechanismThe set of elementary steps by which a reaction is thought to occur; each individual step corresponds to either a bimolecular collision or unimolecular reaction of a single molecule.. The rate of reaction is limited by the rate of the slowest step. This elementary process is called the rate-limiting stepThe step in a reaction mechanism that by its relatively slow rate limits the overall rate of a reaction; also called rate-determining step., and the rate law gives us information about the activated complexIn the mechanism of a reaction, a species that lies at an energy peak and that can change either into products or into reactants; also called a transition state. in that step. All the species whose concentrations appear in the rate law must be part of the activated complex, and the amount of each species must be given by the corresponding exponent in the rate law. It must be emphasized that any reaction mechanism is a theory about what is happening on the microscopic level and, as such, cannot be proven to be true. Thus we can say that a proposed mechanism accounts for all the known experimental facts relating to a reaction, but this does not mean it is the only mechanism which can account for those facts. A case in point is the reaction

H2(g) + I2(g) → 2HI(g)

for which the rate law is

Rate = k(cH2)(cI2)      (2)

This was first established experimentally in 1894, and for over 70 years chemists thought that the reaction occurred via a bimolecular collision of an H2 molecules with an I2 molecule. This agrees with the rate law since the activated complex would have the formula H2I2, containing 1H2and 1I2.

In 1967, however, it was shown that the reaction speed was increased considerably by yellow light from a powerful lamp. Such light is capable of dissociating I2 molecules into atomsThe smallest particle of an element that can be involved in chemical combination with another element; an atom consists of protons and neutrons in a tiny, very dense nucleus, surrounded by electrons, which occupy most of its volume.:

I2 $\xrightarrow{\text{light}}$ I + I

The fact that the light increased the reaction rate suggested that I atoms might be involved as intermediates in the mechanism, and the currently accepted mechanism is

I2 ⇌ 2I      fast      (3a)

I + H2 ⇌ H2I    fast      (3b)

H2I + I → 2HI    slow     (3c)

In this case the rate-limiting step is the last one in the mechanism. It is preceded by two rapidly established equilibria.

The rate law for the bimolecular step (3c) would be

Rate = k′(cH2)(cI)      (4)

but since neither H2I nor I are reactants in the overall reaction, we do not know their concentrations. These concentrations can be obtained, however, by applying the equilibriumA state in which no net change is occurring, that is, in which the concentrations of reactants and products remain constant; chemical equilibrium is characterized by forward and reverse reactions occurring at the same rate. law to Eqs. (3a) and (3b):

K(3a) = $\frac{c_{\text{I}}^{\text{2}}}{c_{\text{I}_{\text{2}}}}$     K(3b) = $\frac{c_{\text{H}_{\text{2}}\text{I}}}{\text{(}c_{\text{I}}\text{)(}c_{\text{H}_{\text{2}}}\text{)}}$

Rearranging these equations we obtain

c I2 = K(3a)(cI2)     cH2I = K(3b)(cI)(cH2)

These may be substituted into Eq. (4):

Rate = kK(3b)(cI)(cH2)(cI) = kK(3b)(cH2)(cI)2

= kK(3b)(cH2)K(3a)(cI2)

= kK(3b)K(3a)(cH2)(cI2)      (5)

The rate constantIn a differential rate equation, the proportionality constant that relates the rate with the concentrations of reactants and other species that affect the rate. The rate constant is the rate of reaction when all concentrations are 1 M. k in the rate law [Eq. (2)] can he identified with the productA substance produced by a chemical reaction. of constants kK(3b)K(3a), and so Eqs. (5) and (2) are the same. This confirms our previous statement that the rate law tells us what species participate in the activated complex during the rate-limiting step. It also shows how more than one mechanism can lead to an activated complex having the same composition.

EXAMPLE The reaction between nitric oxide and oxygen:

2NO + O2 → 2NO2

is found experimentally to obey the rate law

Rate = k(cNO)2(cO2)

Decide which of the following mechanisms is compatible with this rate law:

a) NO + NO ⇌ N2O2           fast

N2O2 + O2 → 2NO2         slow

b)  NO + NO → NO2 + N     slow

N + O2 → NO2             fast

c)  NO + O2 ⇌ NO3            fast

NO3 + NO → 2NO2         slow

d)   NO + O2 → NO2 + O      slow

NO + O → NO2             fast

Solution The slow step in mechanism a involves 2N atoms and 4 O atoms,i.e., an activated complex with the formula NO4. The same is true of mechanism c. Both are thus compatible with the rate law which also involves 2N and 4 O atoms. The other two mechanisms are not compatible with the measured rate law.