Internal Energy

Submitted by jwmoore on Sat, 03/26/2011 - 11:42


When matterAnything that occupies space and has mass; contrasted with energy. absorbs or releases heatEnergy transferred as a result of a temperature difference; a form of energy stored in the movement of atomic-sized particles. energyA system's capacity to do work., we cannot always explain this energy change on the microscopic level in terms of a speeding up or a slowing down of molecular motion as we do for heat capacities. This is particularly true when the heat change accompanies a chemical changeA process in which one or more substances, the reactant or reactants, change into one or more different substances, the products; chemical change involves rearrangement, combination, or separation of atoms. Also referred to as chemical reaction.. Here we must consider changes in the kinetic and potential energies of electrons in the atoms and molecules involved, that is, changes in the electronic energy.

As a simple example of a chemical change, let us consider an exothermicDescribes a process in which energy is transferred to the surroundings as a result of a temperature difference. reaction involving only one kind of atom, the decomposition of ozone, O3:


2O3(g) → 3O2(g)      25°C      (1)


O3 is a gas which occurs in very low but very important concentrations in the upper atmosphereA unit of pressure equal to 101.325 kPa or 760 mmHg; abbreviated atm. Also, the mixture of gases surrounding the earth.. It can be produced in somewhat higher concentrations in the laboratory by using an electric spark discharge and can then be concentratedIncreased the concentration of a mixture or solution (verb). Having a large concentration (adjective). and purified. The result is a blue gas which is dangerously unstable and liable to explode without warning. Let us now suppose that we have a pure sample of 2 mol O3(g) in a closed container at 25°C and are able to measure the quantity of heat evolved when it subsequently explodes to form O2 gas according to Eq. (1) (see Fig. 1). It is found that 287.9 kJ is released. This energy heats up the surroundings.

Where do these 287.9 kJ come from? Certainly not entirely from the translational kinetic energy of the molecules. To begin with we had 2 mol O3 at 25°C and at the end 3 mol O2 at 25°C. Since the translational kinetic energy of any gas is 3/2 nRT, this corresponds to an increase of 3/2 (3 mol – 2 mol)RT = 3/2 × 1 mol × 8.314 J K–1 mol–1 × 298 K = 3.72 kJ. After the reaction the translational energy of the molecules is higher, and so heat should have been absorbed, not given off. In any case 3.73 kJ is only 1.3 percent of the total heat change. The changes in rotational and vibrational energy are even smaller, accounting for a decrease in energy of the substanceA material that is either an element or that has a fixed ratio of elements in its chemical formula. in the container by only 0.88 kJ.

Figure 1 The reaction 2O3(g)3O2(g) (25°C). When the atoms in the O3 molecules rearrange to form O2 molecules, the result is a lowering in the electronic energy and a consequent release of 288 kJ of heat energy to the surroundings.

From the standpoint of energy, the most important thing that happens as 2 mol O3 is converted into 3 mol O2 is rearrangement of the valence electrons so that they are closer to positively charged O nuclei. We see in other sections that the closer electrons are to nuclei, the lower their total energy. Thus three O2 molecules have less electronic energy than the two O3 molecules from which they were formed. The remaining energy first appears as kinetic energy of the O2 molecules. Immediately after the reaction the O2 is at a very high temperatureA physical property that indicates whether one object can transfer thermal energy to another object.. Eventually this energy finds its way to the surroundings, and the O2 cools to room temperature.

A detailed summary of the various energy changes which occur when O3 reacts to form O2 is given in Table 1. The important message of this table is that 99 percent of the energy change is attributable to the change in electronic energy. This is a typical figure for gaseous reactions. What makes a gaseous reaction exothermic or endothermicIn chemical thermodynamics, describes a process in which energy is transferred from the surroundings to the system as a result of a temperature difference. is the change in the bonding. Changes in the energies of molecular motion can usually be neglected by comparison.


TABLE 1 Detailed Balance Sheet of the Energy Changes Occurring in the Reaction


2O3(g) → 3O2(g)      25°C, constant volume


Type of Energy Initial Value/kJ Final Value/kJ Change*in Energy/kJ
Electronic
x
x – 290.70
–290.70
Translational
7.43
11.15
+3.72
Rotational and vibrational
8.32
7.44
– 0.88
Total
x + 15.75
x – 272.11
–287.86

* Final value – initial value.

There is no experimental means of determining the initial or final value of the electronic energy—only the change in electronic energy can be measured. Highly accurate calculations of electronic energy from wave-mechanical theory require complicated mathematics end a great deal of computer power. Therefore we have represented the initial electronic energy by x.


The sum of all the different kinds of energy which the molecules of a substance can possess is called the internal energyA thermodynamic function corresponding to the energy of a system; represented by the symbol U or E. and given the symbol U. (The symbol E also widely used.) In a gas we can regard the internal energy as the sum of the electronic, translational, rotational, and vibrational energies. In the case of liquids and solids the molecules are closer together, and we must include the potential energy due to their interactions with each other. Noncovalent interactions (intermolecular forces) attract one molecule to others. In addition, the motion of one molecule now affects its neighbors, and we can no longer subdivide the energy into neat categories as in the case of a gas.

Measurement of Internal Energy

Equation (1) tells us how to detect and measure changes in the internal energy of a system. If we carry out any process in a closed container the volume remains constant), the quantity of heat absorbed by the system equals the increase in internal energy.

qV = ΔU (1)


A convenient device for making such measurements is a bomb calorimeterA sturdy, rigid container (bomb) and associated device for measuring the heat energy transferred out of or into a chemical system in which a reaction occurs; the sturdy bomb maintains constant volume. (Fig. 2), which contains a steel-walled vessel (bomb) with a screw-on gas-tight lid. In the bomb can be placed a weighed sample of a combustible substance together with O2(g) at about 3 MPa (30 atmAbbreviation for atmosphere, a unit of pressure equal to 101.325 kPa or 760 mmHg.) pressureForce per unit area; in gases arising from the force exerted by collisions of gas molecules with the wall of the container.. When the substance is ignited by momentarily passing electrical current through a heating wire, the heat energy released by its combustionVigorous combination of a material with oxygen gas, usually resulting in a flame. raises the temperature of water surrounding the bomb. Measurement of the change in temperature of the water permits calculation ofqV (and thus ΔU), provided the heat capacity of the calorimeter is known.

The heat capacity can be determined as in Example 1 from Heat Capacities or by igniting a substance for which ΔU is already known.


Figure 2 A schematic of a bomb calorimeter.



EXAMPLE 1 When 0.7943g of glucose, C6H12O6, is ignited in a bomb calorimeter, the temperature rise is found to be 1.841 K. The heat capacity of the calorimeter is 6.746 kJ K–1. Find ΔUm for the reaction

C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(l)


under the prevailing conditions.


SolutionA mixture of one or more substances dissolved in a solvent to give a homogeneous mixture. The heat energy absorbed by the calorimeter in increasing its temperature by 1.841 K is given by


q = C ΔT = 6.745 kJ K–1 × 1.841 K = 12.42 kJ


Since this heat energy was released by the reaction system, we must regard it as negative. Accordingly,

qV = –12.42 kJ = ΔU


We need now only to calculate the change in internal energy per mole, that is, ΔUm. Now


         n_{\text{glucose}}=\text{0}\text{.7953 g }\times \text{ }\frac{\text{1 mol}}{\text{180}\text{.16 g}}=\text{4}\text{.409 }\times \text{ 10}^{-\text{3}}\text{ mol}


Thus      \Delta U_{m}=\frac{-\text{12}\text{.42 kJ}}{\text{4}\text{.409 }\times \text{ 10}^{-\text{3}}\text{ mol}}=-\text{2817 kJ mol}^{-\text{1}}